White LED Dock Piling Light Cap – 12V DC RGBWW or RGBWC

White LED Dock Piling Light Cap – 12V DC RGBWW or RGBCW with or without remote

Coastal Durability & Nighttime Elegance

Remote Note: All piling lights are designed for remote control. You only need one light with a remote for the whole dock, since every light connects to the same controller. One remote runs the entire system with no extra remotes needed.

Protect your pilings and light up your waterfront.

Our White LED Dock Piling Light Caps combine safety and stunning ambiance in one clean, marine-grade solution. Designed to withstand tough coastal environments, these caps provide low-glare, efficient LED lighting while sealing piling tops against water intrusion and deterring birds from nesting. It’s a sleek, corrosion-proof upgrade built to last.

⭐ Why You’ll Love These Piling Light Caps

✅ 12V DC Marine-Grade LED Lighting
Safe, low-voltage illumination that’s perfect for docks, boat lifts, and marinas.

✅ Enhanced Night Visibility & Safety
Pick RGBWW (warm white base) or RGBWC (cool white base) to create vibrant color scenes or cozy evening glows. Both come with or without a remote to set your favorite look.

✅ Maintenance-Free
Integrated LEDs mean no bulbs to replace ever.

✅ Corrosion-Resistant Composite
Built to withstand salt, rain, and sun for reliable long-term use.

✅ Streamlined, Low-Profile Design
No bulky fixtures or messy wiring. Just a smooth, seamless fit on top of your pilings.

✅ Protects Pilings & Helps Deter Birds
Seals piling tops to keep out water and discourages birds from roosting.

💡Lighting Options:

• RGBWW (WW 2700k) or RGBCW (CW 6000k) Color-Changing:
  Lets you dial in the perfect color with or without the remote option to create vibrant dock parties or soft evening tones.
• Other RGBW remote options available 
• S2-B / S2-W – 2.4G Rainbow Remote (RGB+CCT)

⚡ Power It Right

These lights pair with a non-dimmable 12V LED driver (AC to DC). Size the driver to your total wattage and wire run, then add the cap wattage from the table below to size it correctly. View compatible LED drivers here ›

Built to outlast cheaper lookalikes

At DRSA, our piling caps are built for long-term marine performance, not for looks on day one. Lower-cost caps can look similar at first. The difference shows up over time, in the materials, the construction, the durability, and how the light holds up season after season.

We build ours for harsh saltwater conditions with higher-quality components, stronger finishes, better sealing, and more reliable LED systems.

Here's where that shows up:

• Marine-grade materials that handle UV, salt, heat, and moisture
• Higher-quality LEDs with better brightness and color consistency
• Stronger waterproofing and corrosion resistance
• Cleaner installation and better fitment
• Longer service life with less maintenance
• A better look and a stronger nighttime lighting effect

In a marine environment, cheap products often get expensive later through fading, corrosion, water intrusion, or early failure. Our goal is a cap that lasts longer, performs better, and looks premium for years.

📏 How to Choose Your Size

Measure your pilings and pick a cap that’s 1.5" to 2" larger in diameter for the best fit.

How to measure for pile caps

Measuring your wooden pilings correctly gets you the right cap the first time. Even pilings set on the same day can vary by 2 to 3 inches, so check each one on its own.

Most accurate method: use a string

1. Wrap a piece of string snugly around the full circumference of the piling.
2. Measure the total length of the string in inches.
3. Divide that number by π (3.1416) to get the diameter.
4. Round up to the next half inch to choose your cap size.

Example: 25" string ÷ 3.1416 = 7.96, so you need an 8" piling cap.

1. You can also use a free online circumference calculator

✅ Quick Steps Recap

• A. Wrap the string around the piling

• B. Measure the string’s length

• C. Divide by 3.1416

• D. Choose the next closest half-size cap

🔎 Less Accurate Method (If You Don’t Have a String)

1. Measure across the piling North to South.
2. Measure again East to West.
3. Average the two numbers and round up to the nearest half inch.

Example: a piling that measures 8.3" by 8.1" takes an 8.5" piling cap.

⚙ Technical details

📍 Perfect for

• Private residential docks
• Marina slips and piers
• Boat lifts and launch areas
• Lighting the walkway from dock to boat

🛠 Warranty

3-Year Prorated Warranty for Original Owner

• Year 1: Free replacement for any light failures
• Year 2: Replace at 20% of the original price
• Year 3: Replace at 35% of the original price

⚠️ RGBW controllers are not covered for water exposure. Avoid spraying water beneath the piling cap.
RGB controller replacements: $60, including return shipping (light must be returned for service).

🌊 Transform Your Dock

Upgrade to a modern look that protects your pilings and lights up your nights. No more bulky fixtures or endless bulb changes, just beautiful, dependable dock lighting.

❓ FAQs

Q: Do the RGB piling lights come with a remote?
Yes. All RGB models include a remote so you can pick colors and adjust lighting effects.

Q: Does the warm white (RGBWW) or cool white (RGBWC) option include a remote?
Yes. Both RGBWW and RGBWC are full RGB color systems with a remote.

Q: Can I get wholesale pricing?
Yes. Approved DRSA wholesale accounts qualify for special pricing.

Click the form to apply.

Q: What power supply do I need?
A non-dimmable 12V LED driver, matched to your total wattage and distance.

Sized according to your total wattage and wire run. View compatible power supplies ›

Q: How do I pick the right size?
Measure your piling’s diameter and choose a cap that’s 1.5" to 2" larger.

Q: Are these weatherproof?
Absolutely. They’re built for salt air, rain, and full marine exposure.

Q: Will they help keep birds off my dock?
Yes. The tapered design helps prevent birds from roosting.

Q: Can I replace the remote if it breaks?
Yes. Replacement RGBW controllers are $60 and include return shipping (light must be returned for servicing).

Q: Who installs these?
We handle installations across Florida, or any dock builder familiar with marine lighting can easily install them.

📞 Questions or Need Help Sizing?

Call us today and we’ll walk you through picking the right size, color option, and power supply.