Piling Cap Configurator & Quote Builder
Add each piling below. Enter circumference or two tape measurements. We’ll calculate diameter and cap size, then drop it into your quote so you can copy, download, or print.
Piling Cap Configurator
Calculate your piling diameter and get a recommended cap size range in seconds.
Diameter = circumference ÷ 3.1416
Measured Piling Diameter
—
Rounded to nearest 0.5 inch
Recommended Cap Size
—
Choose closer to +1.5 inch for snug, +2.0 inch for roomy
Tips
- Measure each piling individually. Sizes often vary.
- If a warm white cap does not light on first try, swap polarity red and white.
| # | Method | Circumf. (in) | N/S (in) | E/W (in) | Diameter (in) | Cap Range | Qty | Notes |
|---|
Tip: Use either circumference, or both N/S and E/W. We round diameter up to the nearest 0.5 inch and recommend +1.5 to +2.0 inches for cap size.
Total Caps: 0