Under Water Boat Lights

LED boat deck lights
Center console boat lights underwater boat lights


This LED adaptation of the SV19 has been introduced due to the high demand for an LED light that can be serviced from the inside of the boat. This feature allows for any required servicing or repair of the LEDs to be completed with the boat in the water, a convenient feature. The domed lens magnifies and intensifies the LED light ouput to give a pleasant wide angled beam of light not normally associated with LEDs. This light is ideal for small and midsized boats, especially if they remain in the water and operates on 12 and 24 VDC systems.

  • Depending upon water clarity conditions, the light beam can reach up to 15 meters (49 feet).
  • Convex crown glass lens
  • The commercial grade Light Emitting Diode (LED) technology used in this light will provide robust and reliable operation under normal operating conditions.
  • Construction = Marine bronze - Black anodized marine aluminum alloy
  • Power supply = 11-28VDC input - 1.03 Amps 24V / 2.23 Amps 12V - 23 Watt - Operating temp from -30°C (-22°F) to 38°C (100°F)
  • This light is intended for use on fiberglass and wood hulled vessels.

Lamp: Life Length: Kelvin Color Temp: Glass Lens: Thickness: Power Supply: Casing Material Dimensions: Weight: Colors: Installation: Angles Available:
9 Cree LED diodes 30,000 hours plus 6500
Lumens: 1938
Convex Crown Glass Thick - 23.5mm / 0.93"
Diameter - 52mm / 2.1 "
10-30 VDC
1.03 Amps 24V / 2.23 Amps 12V
Marine Bronze / Marine Aluminum
105 mm (4.13”) x 189 mm (7.44”)
1.9Kg/4.2lbs white, blue Recommended at least 10” (250mm) below the waterline between 3 - 6 feet (1 - 2 meters) apart. (80mm) Flush

Underwater Lights ® USA, LLC takes pride in providing well designed, high quality and thoroughly tested lights that allow you to “enhance your boating experience”. These lights can be installed in your vessel for aesthetics, to attract fish, for security and safety.

  • The body of the light must be electrically joined to the vessels grounding and cathodic protection system. Failure to do so may cause light corrosion.
  • The light should be visually inspected every six months.
  • The light electrical cabling should be visually inspected for proper operating condition every six months .
  • Marine growth should be removed from the convex glass usi ng a soft brush to allow illumination to exit the light.
  • Never try to install or remove this light while the vessel is in the water.
  • Warranty

    Underwater Lights ® USA, LLC warrants this light to be free from defects in workmanship and materials for a period of two years from the date of original purchase. Further, misuse, abuse, impro per installation, neglect, improper shipping, damage caused by disasters such as fire, flood and lightning, unauthorized repair or modifications will void said warranty. Should your light prove defective during the warranty period, promptly contact Underwater Lights ® USA, LLC for an RMA number and then return the light freight prepaid with the RMA number clearly marked on the outside of the shipping container.