• FOR ANY DRSA PRODUCT

    PLEASE FOLLOW INSTRUCTIONS BELOW AND THE INSTRUCTIONS FROM YOUR SPECIFIC PRODUCT


  • Although every precaution has been taken in the manufacturing of our fixtures, we recommend that you inspect your product for defects prior to installation.

  • A Fixture should be installed and wired in accordance with the National Fire Protection Association and standards set forth by the American Boat and Yacht Council, preferably by a professional electrician.

  • Installation locations must be free of existing cables and obstructions. Proper clearance at the rear of the fixture is essential for effective heat dissipation. Do not install the fixture where it will come in contact with flammable objects. All electrical connections must be secured.

  • It is essential that the proper voltage, wattage, and polarity be observed in order to avoid possible injury or damage to the fixture. Bulb contact configuration must be correct. Many bulbs look the same but may be of different electrical specifications.

    		•
  • Lamp (Bulb) contact configuration must be correct. Handle all lamps with great care. Never touch halogen lamps with bare hands. Direct contact with your skin will damage or decrease the life of the bulb.

  • Switches are a potential ignition source. Do not install a 'selfswitched' fixture in an area requiring ignition protection unless it is clearly marked and identified as ignition protection compliant.


  • Potential Radio Frequency Interference (RFI) and/or Electromagnetic Interference (EMI) may be encountered when using various electronic devices including, but not limited to, digital switching units (dimmers) and fluorescent ballasts. Careful consideration should be given when installing such devices in the proximity of or on the same electrical circuits as devices including, but not limited to, radio frequency receivers used for communication or navigation, digital engine controllers, etc.

  • To remove smudges, fingerprints and dust, rub surfaces gently with a clean soft cloth. To eliminate accumulated salt spray, clean with soft cloth and fresh water. Do not use chemical cleaning agents such as window cleaners or polishing sprays on the fixture's finish. They may dissolve the clear-coat finish and tarnishing will commence. This may void warranty.

  • If you are uncertain about a fixture or experience difficulty, please contact our technical department for assistance.


    53 Sonny Briggs


    Tech Tips
    Click Here For More Tech Tips


    Please contact us for any questions.
    800-844-8593

    • Marine Lighting, LED, Underwater Lights, Dimmers, Switches, Bulbs, LED Navigation Light, Electronics, Electric, Waterproof, Vimar, LED Marine Lights
    DRSA manufacturer and distributor of lighting and electrical devices has been chosen Primary Supplier of Choice by the industry buying group, American Boatbuilders Association (ABA).

    Marine Lighting, LED, Underwater Lights, Dimmers, Switches, Bulbs, LED Navigation Light, Electronics, Electric, Waterproof, Vimar, LED Marine Lights
    National Marine Manufacturers Association (NMMA) is the leading association representing the recreational boating industry. NMMA member companies produce more than 80 percent of the boats, engines, trailers, accessories and gear used by boaters in the United States. The association is dedicated to industry growth through programs in public policy, market research and data, product quality assurance and marketing communications.

    Photo
    Gallery

    DRSA Order Request form download