High Power LEDPlease contact us for any questions concerning our High Power LED
|
|
The RGB LED Engine provides a seven color range to choose from. The Tri-Color LED Engine provides White, Red, and Blue. Each unit is provided with both a clear and a frosted glass lens for use depending on the specific fixture in which the LED Engine is being utilized.
All 4 styles are available with one power input version; 10-24vac /10-30vdc. The WW, CW, and RGB Engines are available in both versions utilizing a Driver/Dimmer, as well as a Two-Wire version for use on retrofits with existing wiring. |
Specifications
|
|
The LED Driver/Dimmer operate up to 12 LED Engines when powered with 10-15vdc, and up to 18 LED Engines when powered with 24V-35vdc. The Driver/Dimmer allows for switching between colors as well as full dimming control of the lights with a simple momentary switch for one-touch digital operation.
The RGB version requires the RGB Driver/Dimmer which allows for control of the color program and dimming functions. This driver gives you 7 color options to choose from and in the last mode the LED Engine gradually cycles through all 7 colors. A simple push of the switch cycles the light through White, Red, Light Blue, Dark Blue, Purple, Yellow, and Green. By holding the switch you are able to control the dimming of the lights. This RGB Engine allows you to change the color and brightness to your mood.
Kingston Antigua Jamaica 
Explorer Los Hermanos Expedition 
Pioneer Little Inagua Corsica 
Negril Voyager Montserrat |
The Tri-Color Engine has 4 different modes to choose from. 3 different colors, and in the last mode the light will gradually cycle through all 3 colors. This LED Engine allows you to change from White, Red and Blue depending on your mood. A simple push of the switch provides off/on and color changing.
Additional LED Products
Save Power & Maintenance With LED Lights
- High Power LED Ceiling Lights
- High Power LED Bars
- High Power RGB LED Bar
- High Power LED Drivers, Dimmers & Voltage Regulators
- High Power LED Multi-Lights
- Bay 15D 50 LED's Replacement Bulb
- Flexible Chart-/Reading Light w/Touch LED
- Step-/Courtesy Light
- LED Marker Lights
- High Power LED Underwater Lights
- LED Modules
- Retro Fit LED Light Unit MR16 Size
- Retro Fit LED Light Unit 60mm Size
- Front Cover Fitting Kits Retro Fit Light Units
- LED Bulbs
HIGH POWER LED CEILING LIGHTS
When fitted, the light will only stick out 1mm of your ceiling.
Now MAST Products is offering an exciting new range of extremely bright flush mount LED Ceiling Lights which will allow builders and owners to quickly and easily install or replace wherever it's required. These slim, anodized aluminium units, typically measuring of 09,5cm diameter and only 25mm depth, contain 3 LED's which produce enough light output so it's adequate to read by. Because of their size it's easy to replace your old halogen lights. Just widen the hole power the wires and fit the light into the old place of the halogen light. No screws required as the light keeps themselves fastened with spring clips. When fitted the light is almost as flat as your ceiling. The light only sticks out 1mm which is a big benefit on your boat.
Two beam angles and two colour light output are available. 15 degree Spot-, with warm white LED's, or 45 degree Floodlight with warm white or red LED's. This means that these slim ceiling lights can also be used for low level illumination which won't destroy your night vision with the red colour.
Current consumption is minute and the heat generated is minimal, another plus when fitting LED's into confined spaces. Lamp life is an amazing over 70,000 hours (beware, however, this only applies to lamps of this high 'quality', not to all LED's). So if you wanted to you could turn the lights on when you installed them and never turn them off again! It also means that leaving a few lights on as a 'security' measure or to light your path back on board is practical.
Δ Simple installation 10V to 30V-DC powered
Δ Saves power only 3 Watt power consumption
Δ Small dimensions only 09,5cm and 2,5cm depth
Δ Warm White available in 15 degree Spot- or 45 degree Floodlight
Δ Red available in 45 degree Floodlight
Δ Available in Aluminium, Chrome Plated and Brass Plated housing
Specifications
|
HIGH POWER LED BARS
Save power and maintenance with the NEW LED LIGHT BARS!
BRIGHT 'SURFACE MOUNT' LED'S ARE EASY TO INSTALL AS RETROFITS and ideal for Ambient Lighting.
Now MAST Products is offering an exciting new range of extremely bright, compact, surface mount LED lighting Bars which will allow builders and owners to quickly and easily install or add lighting wherever it's required.
These extremely bright, compact, surface mount LED lighting Bars will allow you to quickly aand easily install or add lighting wherever it's required.
These slim, anodized aluminium units, typically measuring just 10mm deep by 30mm wide by 210mm long, contain 3 LED's which produce enough light output so it's adequate to read by.
Because of their tiny size and weight, mounting couldn't be simpler and, apart from the need to run the thin cable back to an appropriate 12V/DC feed source, this can be achieved by a couple of small screws.
The 21cm is available in a flat or triangle shape, to be used for fitting on walls or in places where the flat version wouldn't shine in the right direction, and have an aluminium finish.
There are four colours of LED's to choose from for the flat version, Warm White, Cool White, Red, or Bright Blue, and two colours of LEDS's are available for the triangle shape; Warm White or Red. This means that these slim profile bars with red LED's can also be used for low level illumination, which won't compromise your night vision.
Current consumption is minute and the heat generated is minimal, another plus when fitting LED's into confined spaces. Lamp life is an amazing over 70.000 hours (beware, however, this only applies to lamps of this high 'quality', not to all LED's). So if you wanted to you could turn the lights on when you installed them and never turn them off again! It also means that leaving a few lights on as a 'security' measure or to light your path back on board is practical.
The LED Bars can be placed on a lot of different places on board like in the wet cell, underneath the cupboard, in the cabin, a red bar in the navigation corner and as a boom light, a spray hood light and even as a spreader light as they are waterproof.
Perfect to use as a Boom Light!
Specifications
|
Take a look around your boat. It's probable that you will find a few places where some additional light would improve things. Now there's a modern and convenient solution from MAST Products.
- No replacement required, lifetime over 70,000 hours
- Simple installation 12V-DC powered
- Saves power only 3 Watt power consumption
- Small dimensions only 210mm by 29mm
- Waterproof IP68
The 95cm & 125cm versions have a flat shape, a white finish, and a choice of Warm White or Cool White LED's.
The LED Light Bars are dimmable with a standard 12v/DC dimmer.
Specifications
|
High Power RGB LED Bar
The RGB LED Bars need the Driver/Dimmer DR010101 for power and to control the colour settings.
The Driver will allow you to choose from 7 colours of light, a mode to gradually change through all 7 colours and dimming.
Specifications
|
|
High Power LED Drivers
Dimmers & Voltage Regulator
| The RGB LED Bars require a Driver/Dimmer to power and control the color, as well as provide full digital dimming. Pressing a simple momentary switch will change colors, and in the last mode the LED's will gradually cycle through all 7 colors. The driver also provides dimming capability by simply pressing and holding the momentary switch, resulting in full digital dimming operation. |
DR010101 & DR030303
|
Specifications
|
Specifications
|
The Driver/Dimmers are specifically designed for our LED lights. The driver DR010101 is for use with the RGB HP LED Engine and the RGB HP LED Bar. The driver accommodates up to 12 RGB HP LED Engines or 4 RGB LED Bars when 10-15vdc powered, and 16 RGB HP LED Engines or 6 RGB LED Bars when 24-35vdc powered. The driver allows you a 7 color choice, a gradual cycling through all colors mode, and full dimming capability. A momentary switch is required to control the driver.
The Driver/Dimmer DR030303 is for use with the Warm White or Cool White HP LED Engines. The driver accommodates up to 12 Warm White or Cool White HP LED Engines when 10-15vdc powered, up to16 Warm White or Cool White HP LED Engines when 24V-35vdc powered, and provides full digital dimming capability. A momentary switch is required to control the driver.
DR040404 & DR050505
The Driver/Dimmer DR040404 is a transformer/voltage regulator/dimmer. It transforms 24-35vdc input to 12vdc output. The driver can accommodate a maximum of 60 watts of LED lighting, and provides full digital dimming capability. A momentary switch is required to control the driver.
The Driver/Dimmer DR050505 operates on 12vdc. This Driver/Dimmer can accommodate a maximum of 50 watts of LED lighting, and provides full digital dimming capability. A momentary switch is required to control the driver.
Specifications
|
Specifications
|
HIGH POWER LED MULTI LIGHTS
The Multi Light is designed to be used in many ways. As a spreader light, a deck light, a radar boom light, a cabin light, and so on.
The light can be either surface mounted or flush mounted simply by removing the back housing and is delivered with a choice of Cool White or Warm White LED's. Ensuring suitability for a variety of different purposes and ambient settings.
The Cool White LED's will primarily be used as working lights such as spreader lights and floodlights whilst the Warm White LED's will suit internal living areas for a softer environment.
The Multi Light can be used in industrial and 'hard knock' environments, even multi-story car parking lots! We tested it by driving over one!
As the Multi Light is multi voltage it can be powered from 10V to 30V/DC and are suitable for use with both a 12V/DC power supply and a 24V/DC power supply.
- The Multi Light is available in grey, white and chrome plated.
- The long life expectancy promises an estimated life-time of 70,000 hours. No maintenance needed.
- With one on each spreader your deck is completely illuminated by only 6 Watts of power consumption.
Specifications
|
Bay15D 50 LED's REPLACEMENT BULB
Everybody knows navigation and anchor lights drain the ships batteries drastically. We all know standard bulbs have a limited life and fragility.
Now we have a way to tackle these problems!
The Bay15D 50 LED's Replacement Bulb will replace your conventional 25Watt glowing bulb instantly converting your navigation lights into LED navigation lights.
-The LED bulb consumes just 3.5 Watts instead of the normal 25 Watts. Saving battery life and expectancy.
-Featuring a long life capability and being insensitive to the movements and vibrations of the ship they will last for over 50.000 hours. Fewer trips up the mast!
-Normally LED's need to be wired the right way to ensure polarity but as this light has a built-in diode bridge it doesn't matter which way you have connected the positive and negative poles to your navigation light fixture. Again ensuring minimum fuss at the top of the mast!
-As most of the navigation lights always leak a little, we have waterproofed the LED bulb. The LED bulb can be powered from 10V to 30V/DC so they are suitable to use on boats with a 12V/DC power supply and a 24V/DC power supply.
When the time comes to replace your bulbs make sure you buy the right LED replacement bulb. Some other products on the market are not bright enough to replace a 25 Watt conventional bulb and safety is of the utmost importance when specifying navigation lights.
Specifications
|
FLEXIBLE CHART-/READING
LIGHT WITH TOUCH LED
The LED Chart/Reading Light is designed for your convenience. In the dark, you can always find the light very easily, due to the red LED which is lightened all the time.
The red LED consumes no more than .07W, which will not drain your batteries.
With the 30cm long flexible shaft you can move the light in any position.
The light consumes merely 1.2w when it's fully powered, and the life-time is over 50,000 hours.
|
|
Just touch the red LED and the very bright white LED's will light up. Touch the LED again and the white LED's will turn off, leaving only the red LED on, which can be used as low level illumination light for navigation at night.
Specifications
|
STEP-/COURTESY LIGHT
These step/courtesy lights are designed not to shine into your eyes when lighted. Due to the cover, the light shines down.
|
Specifications
|
LED MARKER LIGHT
|
Specifications
|
HIGH POWER LED UNDERWATER LIGHT
|
This small but Powerful LED Underwater Light is made of 316 Stainless Steel. |
|
The extremely Bright 5Watt LED in combination with the very strong Polycarbonate Lens gives an enormous light output. |
|
|
They come with a 5Watt Cool White Power LED or a 5Watt Bright Blue Power LED and can be powered with 10V-30V/DC |
Specifications
|
LED MODULES
The LED Module is designed for many purposes, such as cove lighting, cabinet lighting, marker lighting/courtesy lighting, wardrobe lighting, and even low level illumination lighting for navigation at night with the red colour LED's. 
The LED Modules have 5 Super Bright LED's. They come in a string of 5 meter long with a total of 40 modules and the wire can be cut after each module for any length needed. They are very easy to fit with the double sided 3M tape on the backside or screw fitting. 
The LED Modules are waterproof and available in 4 different colours; Cool White, Warm White, Red and Bright Blue. |
Specifications
|
RETRO FIT LED LIGHT UNIT MR16 SIZE
|
MAST Products now offers the NEW Retro Fit LED Light, which can be fitted in standard MR16 fixtures, or for replacing the halogen parts in existing fixtures. With the optional front covers, which are available in different shapes and finishes, and with the spring clip fitting kit the unit can also be fitted by itself.
|
|
The Retro Fit LED Light comes with a 3Watt LED in two colours Warm White with a colour temperature of 3200k or 3800-4000k, Cook White or RGB Colour LED. The RGB Colour LED will provide you with a 3 or 7 colour range to choose from.
There are two versions available for powering these lights. One version can directly be powered with 10v-24v/AC or 10v-30v/DC which we call the inner controlled version. The other version needs a driver, and can be powered with 10v-24v/AC or 10v-35v/DC which we call the outer controlled version. This driver can take up to 16 units and provides you with a dimming capability. A pulse switch must be connected to control the driver. The Driver/Dimmer for these Retro Fit LED Lights: Art. No. DR010101-DR030303
The inner controlled RGB unit has 4 or 8 different modes to choose from.
For the 3 colour version: 3 different colours of light and a mode to gradually change through all 3 colours. White, Red and Bright Blue.
For the 7 colour version: 7 different colours of light and a mode to gradually change through all 7 colours. White, Red, Light Blue, Bright Blue, Purple, Yellow and Green are the colour options. These inner controlled versions are not dimmable.
The outer controlled RGB unit the driver is only available with the 7 colour option but does have a dimming capability.
With each Unit come one clear-, and one frosted glass lens, which you can change depending on the fixture you want to fit the Retro Fit Units into.
The optional front covers come in round with a dimension of Ø60mm and in square of 60mm x 60mm. Both covers are available in the finishes Chrome, Brass, White & Brushed Aluminium. To each front cover comes a spring clip to fit the Retro Fit LED Light.
The Retro Fit LED Unit fitted in a reading light.
Specifications
|
RETRO FIT LED LIGHT UNIT 60MM SIZE
|
The Retro Fit LED Light 60mm. Unit can be fitted in existing fixtures, replacing the halogen parts. With the optional Front Cover Fitting kit, the unit can also be fitted by itself. With each Unit comes one clear-, and one frosted glass lens, which you can change depending on the fixture you want to fit the Units into. The Retro Fit LED Light 60mm Size comes in three different colours; Warm White, Soft White and Cool White. The units can be powered with 10V-24V/AC or 10V-30V/DC. Using only 5Watts, it provides a light output comparable to a 30Watt halogen light. The Retro Fit LED Light 60mm Size is available in two versions, one regular, and one with a built in dimming mode. The version with the dimming capability must be controlled with a pulse switch. |
|
 
|
Specifications
|
FRONT COVER FITTING KITS
RETRO FIT LIGHT UNITS
|
The Front Cover Fitting Kits include a front cover and spring clip, all you need for fitting
the Retro Fit LED Light Units by themselves.
They come in round with a dimension of Ø62mm, and in square with a dimension of
62mm x 62mm for the 3Watt Retro Fit LED Light Unit MR16 Size, or in round with a
dimension of Ø78mm, and in square with a dimension of 78mm x 78mm for the 5Watt
Retro Fit LED Light Unit 60mm Size.
Available finishes are Brushed Aluminium, Chrome Plated, White and Brass Plated Brass.
Article No.
RF101010-RF101013: MR16 Size Round Ø60mm
RF101014-RF101017: MR16 Size Square 60mm x 60mm
RF656565-RF656568: 60mm Size Round Ø78mm
RF656569-RF656572: 60mm Size Square 78mm x 78mm
New Product
LED Bulbs - G4 & MR11 Replacement Bulbs
With the G4 & MR11 7 Super Bright Chip LED's Replacement Bulb, you can instantly replace all your halogen lights with LED's.
The G4 comes with side pins or with back pins on the aluminium housing to fit any fixture. The back pins are mainly used in reading lights as the side pins are mainly used in down lighters.
Using merely 1.2 Watts, they provide a light output comparable with a 10 Watt Halogen light.
They come in two different colours: Warm White and Soft White.
G4 Back Pin G4 Side Pin MR11
Specifications
|
Specifications
|
Back To Top
Please contact us for any questions concerning our High Power LED
800-844-8593
Click Here To Return to Products
DRSA manufacturer and distributor of lighting and electrical devices has been chosen Primary Supplier of Choice by the industry buying group, American Boatbuilders Association (ABA). |
National Marine Manufacturers Association (NMMA) is the leading association representing the recreational boating industry. NMMA member companies produce more than 80 percent of the boats, engines, trailers, accessories and gear used by boaters in the United States. The association is dedicated to industry growth through programs in public policy, market research and data, product quality assurance and marketing communications. |
|
Photo Gallery |
|
